|
|
| |
Product > Tube End Finishing > FM series > FM-60SS ( Short Length Chamfering + LM )
|
|
 |
|
|
 |
| ::: PRODUCTS ::: |
|
|
 |
FM-60SS ( Short Length Chamfering + LM ) |
|
| 2 Axis Chamfering + Length Measuring and Gantry Transportation |
Working lengths from 20mm ~ 300mm. Capacity up to Ø60mm
|
With the SOCO FM series for Chamfering + Length Measuring, it is possible to simultaneously chamfer
both ends of a tube, with up to 3000 mm in working length (FM-76V) and as short as 20mm (FM-60SS),
as well as measure their lengths with tolerances as low as +/- 0.02 mm.
With an optional BTM (Bundle Loading Magazine), the machines offer a completely automatic loading,
feeding, chamfering and length measuring processes.
Using an absolute length measuring system (against a calibrated piece), the machines may also be
programmed to stop after a certain number of pieces do not fall within the specified length tolerance.
This range is suitable for a clean and even chamfer on both ends of the tube, with chamfering the
inside + outside (I/O) and face of the material or making a radius (round) chamfer than measuring its
length. It may also be used for outside chamfering of solid bars (*).
(*) Depending on material’s weight and tensile strength
AUTOMATION
‧Fully automatic chamfering and Length Measuring system, with 2 types of loading magazine:
- Rack – Sliding Magazine ( Standard )
- BTM – Bundle Loading Magazine ( Optional )
‧External and internal chamfering facing with length measuring in 1 process for both sides of the tube,
with optional radius (round) chamfering
‧NC Controls with Electric Servo Chamfering Feed (FM-60ss) or with Optional motorized length
adjusting (FM-76V)
VERSATILITY AND RANGE
• Working length can be as short as 20mm ( FM-60SS ), and 250mm ( FM-76V )
• Diameter ranges from 12mm ( FM-60SS ) ~ 76mm ( FM-76V )
• Programmable Rejection Rates – the operator may choose for the machine to stop after a certain
number of pieces (continuous or separate) does not fall within the specified length tolerances.
• Suitable for Tube and Solid Bars, and materials such as steel, stainless, copper and aluminum (with
optional Speed Inverter)
• Ability to inside + outside ( I/O ) chamfer as deep as 15mm or angles as small as 15 degrees.
• Suitable for inside + outside ( I/O ) Chamfering, Facing, Centering, Deep Chamfering, Radius
Chamfering and Length Measuring
PERFORMANCE
• Cycle Times as short as 4 seconds
• Patented feeding system for the work piece, ensuring a smooth process throughout
• The rigid tool seat has been designed for durability, with easily fixable tool bits for longer working life
• 2 steps chamfering process:
- First step --------- Fast approach for time saving
- Second step ----- Infinitely adjustable chamfering speed for smooth finish
• The length tolerance of each working piece can be controlled within +/- 0.05 mm ~ +/- 0.1 mm
• The length tolerance can be measured down to +/- 0.02 mm
• The Gantry transport system (FM-60ss) and “Walking Beam” system (FM-76V) ensure that the work
pieces are not damaged or scratched through the entire machining process.
• The machine bed’s heavy casting and head stock can absorb working vibrations, providing a
continuous and stable operation |
|
|
|
|
|
|
|
|
 |
|
|
|
|
| |
|
|
